Gocator 2600 Series

The Gocator 2600 series consists of the following models:

MODEL 2630 2640 2650 2670 2690

Data Points / Profile

 4200 4200 4200 4200 4200

Resolution X (µm)

(Profile Data Interval)

 18 - 33 28 - 46 47 - 104 67 - 197 124 - 550
Linearity Z (+/- % of MR) 0.03 0.04 0.04 0.05 0.08
Repeatability Z (µm) 0.30 1.00 2.70 10.00 TBD

Clearance
Distance (CD) (mm)

 110 170 330 495 325

Measurement
Range (MR) (mm)

 130 190 475 1060 1550
Field of View (FOV) (mm) 71 - 135
 105 - 198 190 - 430

272 - 817

 385 - 2000
Laser Classes

2, 3R, 3B

(blue, 405 nm)

2, 3R, 3B

(blue, 405 nm)

2, 3R, 3B

(blue, 405 nm)

2, 3R, 3B

(blue, 405 nm)

2, 3R

(red, 660 nm)
Dimensions (mm) 55 x 105 x 165 55 x 105 x 195 55 x 105 x 280 55 x 105 x 280 55 x 105 x 280
Weight (kg) 1.34 1.48 2.12 2.12 2.12

The following diagram illustrates some of the terms used in the table above.

Specifications stated are based on standard laser classes. Linearity Z and Repeatability Z may vary for other laser classes.

All specification measurements are performed on LMI’s standard calibration target (a diffuse, painted white surface).

Linearity Z is the worst case difference in average height measured, compared to the actual position over the measurement range.

Resolution X is the distance between data points along the laser line.

Repeatability Z is measured with a flat target at the middle of the measurement range. It is the 95% confidence variation of the average height over 4096 frames. Height values are averaged over the full FOV.

See Resolution and Accuracy for more information.

ALL 2600 SERIES MODELS

 

Scan Rate

300 to 5000 Hz
Interface Gigabit Ethernet
Inputs Differential Encoder, Laser Safety Enable, Trigger
Outputs 2x Digital output, RS-485 Serial (115 kBaud)
Housing Gasketed metal enclosure, IP67
Input Voltage (Power) +24 to +48 VDC (15 W); Ripple +/- 10%
Operating Temp. 0 to 50° C
Storage Temp. -30 to 70° C
Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours per direction
Shock Resistance 15 g, half sine wave, 11 ms, positive and negative for X, Y, and Z directions

Mechanical dimensions, CD/FOV/MR, and the envelope for each sensor model are illustrated on the following pages.